Finishing & Refinishing Projects​ finishing/ refinishing of trim, moulding, mantels, stairs, railing, paneling, coffered ceilings, cabinetry and onsite touch-up & repairs.​


​1. Room Setup

​Furniture and decorative pieces will be gently moved away from project areas. We use 100% dust free sanding methods so there is no need to worry over dust particles. If we should need to spray finish, proper precautions will be taken to insure your belongings and surfaces are well protected from overspray particles.

​We meticulously tape off areas to be finished and cover floor areas with specialized protective materials.

​

2. Wood Preparation

​We meticulously inspect woodwork for flaws and discolorations, carefully noting areas needing special attention. Depending on the technique used, the surface area is prepared by either stripping or sanding methods. After a working surface is achieved and clean, the wood is repaired where needed.


​3. Finishing Phase

At this point wood is ready for color touch-ups or staining as needed. And finally the finish is to be applied. We use various methods for finishing for different projects, it may be artfully hand brushed, wiped on, rubbed on or sprayed onto the surface for the desired appearance. This phase takes patience and attention to detail, we may need to apply numerous coats to achieve desired results. Each coat of finish must be allowed to cure undisturbed by major temperature changes or dust & pet hair. We keep the project area very clean and undisturbed at this point. Finish first must "set" then it will cure as it dries. It may continue to gas off for many hours as it hardens. We will communicate this with you if there may be lingering fumes or fragrances in your home during the curing process.

​

4. Area Clean-Up

Once the finish has cured, we will then carefully unmask & clean up. Depending on the size of the project, time required varies.
-  During a single day project we perform a full clean up of the project area.
- During an extended live in project (days, weeks, etc.) we preform daily clean ups of the project area. We understand living in a remodel phase is stressful, and do everything necessary to return your home to you at the end of each workday.

Important factors in a clean remodel/paint job:

  • We have nearly dust free sanding, with HEPA filter FESTOOL vacuums & extractors.​
  • Our cleaning products are gentle and eco friendly. read more about Bona
  • ​We clean as we go, we're used to avoiding dust and dirt. As finishing specialist its incredibly important to maintain a clean environment.

​

5. Final Inspection

​We inspect our finish, noting any imperfections, and apply final touch-ups where required. The project area is carefully cleaned & furniture/ decorative pieces replaced. A final project inspection is performed.


​

Protection & Clean-Up

Painting Contractors

Fernweh.Paint@gmail.com

We treat your home as you would.
When you hire Fernweh for painting or refinishing projects you can expect our professional craftsmen to bring the right equipment, do extensive prep work, and to execute the job for long-lasting results.

Upon the beginning of every project we note the placement of furniture & belongings to ensure they will be placed back to their original positions as if we were never there.

We take special care to protect your windows, flooring, trim & base, furniture and landscaping and always leave your home clean and dust free.

Further details on these steps include the following:

We use eco friendly cleaning products inside your home.

Free Estimates - Licensed - Bonded - Insured

LIC# FERNWPR845QD

360-649-3874

Perfecting the finishing touch

-  KITSAP COUNTY, WASHINGTON

​​​​


Painting​​ & Other Restoration or Repairs 

including drywall repair, plaster repair, venetian plaster, acoustic ceiling removal, texture application/removal & repair, etc. as needed or required for project.

1. Room Setup
All furniture and decorative pieces will be gently moved away from the walls or area of project. We will cover your items completely with plastic to carefully protect these surfaces from particles or debris. Furniture may be placed in the center of the project area or it may be moved into another room.
We will cover floors and tape off trim or moulding in project areas.

We remove electric plates & hard wear to protect them, if needed we will also carefully cover windows & glass doors.

2. Room & Project Preparation
We meticulously inspect all surfaces to be worked on, washing & repairing as needed/ required for a smooth or custom textured surface. We fill nails holes & pops, inspect and repair cracks, scuff and sand surfaces as needed, caulk gaps in trim & spot prime to seal stains where paint is to be applied.

3. Painting & Plaster
We prime surfaces as needed. Apply paint or other mediums with professional tools and techniques. Apply straight paint cut lines between walls, trim & edges.


4. Area Clean Up.

​​Depending on the size of the project, time required varies.

-  During a single day project we perform a full clean up of the project area.

- During an extended live in project (days, weeks, etc.) we preform daily clean ups of the project area. We understand living in a remodel phase is stressful, and do everything necessary to return your home to you at the end of each workday.

​

Important factors in a clean remodel/paint job:


  • ​We have nearly dust free sanding, with HEPA filter FESTOOL vacuums & extractors.  
  • Our cleaning products are gentle and eco friendly. read more about Bona
  • ​We clean as we go, we're used to avoiding dust and dirt. As finishing specialist its incredibly important to maintain a clean environment. 


5. Final Inspection
We complete a thorough project walk-through, and apply final touch-ups where required. The project area is then carefully cleaned & furniture/ decorative pieces replaced. A Final project inspection is performed.